Wednesday, February 22, 2017

Philippines: DENR clears Bataan plants of air, water contamination

Philippines: DENR clears Bataan plants of air, water contamination

THE DEPARTMENT OF ENVIRONMENT AND NATURAL RESOURCES (DENR) HAS REVEALED THAT
THERE WAS NO CONTAMINATION OF AIR AND WATER AROUND A POWER PLANT AND FUEL
REFINERY IN LIMAY, BATAAN.

These are San Miguel Corporation's (SMC) subsidiaries SMC Consolidated Power
Corp. plant and Petron Bataan fuel Refinery's coal-fired plant.

"The coastal water along PLT Cove was found as not contaminated with
substances that could be attributed directly to Petron's dumping of bottom
ash in the area," the DENR said.

DENR's monitoring in January found no volatile organic compounds (VOCs) and
hydrogen sulfide (H2S).

"Total suspended particulates and sulfur dioxide from air samples at the PEX
site and Carbon Site were "within National Ambient Air Quality Guideline
Values," DENR - Environment Management Bureau Central Luzon said.

The DENR-EMB added that ash disposal facilities of both PLT Cove and SMC are
covered in soil, compacted and sealed with water for ash dispersion and
deposition prevention in near communities.

3, 550 metric tons (MT) of ash were hauled out to SMC's Northern Cement
Consolidated in Pangasinan while 7.950 MT were treated, according to data
from Petron Corp.

Two bottom ash dump facilities inside the Petron Bataan Refinery (PBR)
complex have not been used after DENR ordered the halt of dumping activities
on the site.

In 2016, residents of Limay, Bataan accused the power plants of causing
health problems because of an alleged ash spill in their storage facilities.

EMB Central Luzon will continue to assess the environment quality in Limay
communities.

--- --- --- --- --- --- --- --- --- --- --- --- --- --- ---

Link to Original Article:
http://powerphilippines.com/2017/02/22/denr-clears-bataan-plants-air-water-c
ontamination/


--- --- --- --- --- --- --- --- --- --- --- --- --- --- ---

John Diecker
APT Consulting Group Co., Ltd.

www.aptthailand.com

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.